High temperature fan
This series of high-temperature fans is suitable for transporting weakly corrosive high-temperature gases at 500°C. Performance parameters: flow rate 1000-1400000m3/h, total pressure 500-20000Pa. Commonly used in the discharge system of various heating furnaces. The main series include W4-57 series, W4-14 series, W4-09series, W4-10 series, W5-11 series, W5-10 series, W6-04series, W7-11 series, W9- 10 series, W9-08 series and other high-temperature fans can also be designed according to the performance parameters provided by users.
Description
Features
Specification
W series high-temperature fans are suitable for transporting weakly corrosive high-temperature gases at 250°C~750°C. It is mostly used for flue gas exhaust of heating furnace, high temperature dust gas exhaust of cement production line and other high temperature gas conveying systems. It mainly includes W4-73, W5-55, W6-29, W6-31, W6-39, W7-16, W7-28 and other series of high temperature fans. This series of fans has the characteristics of strong anti-deformation ability, stable operation, easy installation and maintenance, etc. Fan aerodynamic parameters, layout structure, direction of rotation and angle can be designed and manufactured according to user requirements.
measures
-
01
The high-temperature fan adopts advanced research and development software for finite element analysis and flow channel optimization design
-
02
In terms of material selection, fully consider the creep strength, durable strength and durable plasticity of the material;
-
03
In terms of thermal expansion design, fully consider the thermal expansion of the casing, the thermal expansion of the shaft seal, the gap between the air inlet and the impeller, the tolerance of the impeller and the main shaft, and the linear expansion of the main shaft;
-
04
In terms of heat dissipation, fully consider the heat dissipation of the bearing and the heat dissipation of the shaft seal;
-
05
For the shutdown of large F-type high-temperature fans, consider the slow-rotation device design.
-
01
310S/304 material/316L material.
-
02
The impeller is resistant to high temperature.
-
03
The impeller is based on stainless steel 310s.
-
04
The fan impeller is connected to the transmission part, and the temperature is cooled by water to prevent the motor from burning out.
-
05
The fan is insulated, the outer layer of the casing passes through the 2-layer casing, and insulation cotton is added in the middle to prevent heat loss.
-
06
Composed of impeller blades, curved front disc and flat rear disc. The material is made of 310s stainless steel with high strength and good durability, and the blades use stainless steel to resist high temperature. And after strict dynamic and static balance correction. The air performance is good, the efficiency is high, and the operation is smooth
-
| number |
series |
medium |
temperature
（℃） |
Air Capacity(m³/h) |
Total Pressure(Pa) |
Rotation Speed(r/min) |
| 1 |
W4-10No 18D |
High temperature flue gas |
600~700 |
133000 |
866 |
730 |
| 2 |
W(N2)5-10No 15D |
High temperature nitrogen |
350 |
94000 |
3430 |
1450 |
| 3 |
W5-10No 20D |
High temperature flue gas |
650 |
136000 |
1100 |
730 |
| 4 |
W6-11No 17F |
Containing dust and smoke |
430 |
45500 |
4282 |
1450 |
| 5 |
W6-2X04No 19F |
Containing dust and smoke |
400 |
140000 |
6000 |
1450 |
| 6 |
W6-12No 22F |
SO2 smoke |
320 |
165000 |
3800 |
960 |
| 7 |
W7-07No 11D |
Dust containing 50g/m³ flue gas |
500 |
6200 |
2645 |
1450 |
| 8 |
W7-10No 19.5F |
SO2 smoke |
330 |
80000 |
5000 |
960 |
.jpg)
.jpg)
